2.7 [1] Configuration
PC Programming Manual
123
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.12 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.12 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Manual References
None
2.7.13 [1-1] Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-
TDA600 only)
The properties of the PRI card can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
