2.7 [1] Configuration
192
PC Programming Manual
2.7.23 [1-1] Slot—IP-Extension Card Property—Common
Settings
IP network data transmission settings can be programmed. To activate any changes made to settings
on this screen, it is necessary to set all installed IP-EXT cards to OUS, then back to INS.
Gateway Address
Specifies the default gateway address of the IP network.
Default
0.0.0.0
Value Range
1.0.0.0–223.255.255.255
Maintenance Console Location
2.7.23 [1-1] Slot—IP-Extension Card Property—Common Settings
Programming Manual References
2.7.22 [1-1] Slot—IP-Extension Card Property—Gateway Address [Common Settings]
Feature Manual References
1.3.21 CTI (Computer Telephony Integration)
Voice (RTP) UDP Port No. (Server)
Specifies the UDP port used by the IP-EXT card to transmit and receive RTP (Realtime Transfer
Protocol) data. This must be changed if another network application is using the same port.
For voice communications, an IP-EXT16 card uses 64 and an IP-EXT4 card uses 16 contiguous UDP
ports, starting from the port number specified here.
Default
8000
Value Range
1024–65472
Maintenance Console Location
2.7.23 [1-1] Slot—IP-Extension Card Property—Common Settings
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
