2.8 [2] System
266
PC Programming Manual
CLIR Set / Cancel
Specifies the feature number used to set or cancel CLIR, which suppresses the presentation of the
caller's number to the called party.
Default
*7*1
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
Feature Manual References
1.3.13 CLIP (Calling Line Identification Presentation)
1.13.21 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification
Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
Switch CLIP of CO Line / Extension (KX-TDA100/KX-TDA200/KX-TDA600
only)
Specifies the feature number used to send either the CLIP number of the CO line in use (subscriber's
number) or the extension to the network.
Default
*7*2
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—Subscriber
Number
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—CLIP ID
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—CLIP ID
Feature Manual References
1.3.13 CLIP (Calling Line Identification Presentation)
