2.8 [2] System
312
PC Programming Manual
PT Operation—Automatic Hold by ICM / CO / ICD Group key
Selects whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button
is pressed while having a conversation.
Default
Disconnect
Value Range
Disable (Disconnect), Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.10.5 [4-1-4] Wired Extension—Flexible Button
2.10.13 [4-2-3] Portable Station—Flexible Button
Feature Manual References
1.3.2 Call Hold
PT Operation—Hold Key Mode
Selects which extensions can retrieve a held call or a call that is transferred by Call Transfer without
Announcement feature.
Default
Hold
Value Range
Hold: Any extension can retrieve a held call.
Exclusive Hold: Only the holding extension can retrieve a held call.
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.3.2 Call Hold
Option 2
Extension Clear—Call Waiting
Specifies whether the Call Waiting setting is cleared when Extension Feature Clear is performed.
