2.8 [2] System
PC Programming Manual
315
End of Dial Plan—[#] as End of Dial for en Bloc mode (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Specifies whether to automatically send "#" as an end code when dialing to an ISDN line; if used as
the end code, "#" will not be dialed out as part of a number even when the "#" key is pressed.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—ISDN In/Out
Call Type
Feature Manual References
1.9.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Redial—Automatic Redial when No Answer (ISDN) (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Selects whether Automatic Redial to an ISDN line is performed when the called party does not
answer within a preprogrammed time period.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.8.4 [2-3] Timers & Counters—Automatic Redial—Redial Call Ring Duration (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Feature Manual References
1.15.1 Redial, Last Number
Redial—Save Dial After Connection to Redial Memory
Specifies whether any digits dialed after the called party answers (for example, to access a specific
extension within another company) are also saved as part of the redial number.
