2.8 [2] System
PC Programming Manual
327
Value Range
Disable: The CLIP number assigned to the virtual PS is sent.
Enable: The CLIP number of the calling party is sent.
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.13.16 Private Network Features—Network ICD Group
1.9.4 ICD Group Features—Outside Destinations
Private Network—Public Call through Private Network—Minimum Public
Caller ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered
as a call from a public network.
Default
9
Value Range
0–15
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Private Network—TIE Call by Extension Numbering (Optional SD Card
Required)
Enables extensions at PBXs connected in a network to have the same extension numbering scheme
and make TIE line calls to each other. For example, extension 101 is registered at PBX 1, and
extension 102 is registered at PBX 2. The user of extension 1 dials 102 and the dialed number is not
found at the local PBX, so the call is redirected to the specified TIE Line and connected to extension
102.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Default
Disable
