2.9 [3] Group
PC Programming Manual
381
Value Range
Immediate, 1–6 Rings, No Ring
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—Distribution Method
Feature Manual References
1.9.2 ICD Group Features—Group Call Distribution
Wrap-up Timer
Specifies the length of time that must pass after completing a call before the member extension can
accept another call.
This timer is used when "
Options—Wrap-up Timer based on
" is set to "
ICD Group Member
" in
2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous
.
Default
0 s
Value Range
10 × n (n=0–300) s
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Wrap-up Timer based on
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 8—Wrap-up Timer
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 8—Wrap-up Timer
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
2.9.13 [3-6] Extension Hunting Group
If an extension within an idle extension hunting group is called when it is busy or in DND mode, the
call can be redirected to another extension in the same hunting group, according to a preprogrammed
hunting type. If there is no idle extension in the group, the call can then be redirected to the overflow
destination, which can be different depending on the time mode (day/lunch/break/night). A maximum
of 64 (with the KX-TDA50/KX-TDA100/KX-TDA200) or 128 (with the KX-TDA600) hunting groups can
be programmed, each containing up to 16 extensions.
To assign members to the group, click
Member List
. To assign extensions as overflow destinations
easily, click
Destination Setting
(see
2.1.6 Extension Number Setting
).
