2.10 [4] Extension
PC Programming Manual
455
Note that for the KX-TDA50, the setting of this parameter is only effective when a resource for sending
extension Caller ID is assigned in
Extension Caller ID Resource-1, 2 (KX-TDA50 only)
for the port
in
2.8.18 [2-10] Extension CID Settings
.
Default
0
Value Range
0–15 s
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.18 [2-10] Extension CID Settings—Extension Caller ID Resource-1, 2 (KX-TDA50 only)
Feature Manual References
1.3.1 Caller ID
SLT MW Mode (KX-TDA100/KX-TDA200/KX-TDA600 only)
Enables the use of the Message Waiting Lamp on an SLT extension connected to the extension port.
Default
Disable
Value Range
Disable, MW-Lamp
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
Wrap-up Timer
Specifies the length of time that must pass after completing a call before an extension will accept
another call when logged in as a member of an Incoming Call Distribution Group.
This timer is used when "
Options—Wrap-up Timer based on
" is set to "
Extension
" in
2.9.11 [3-5-
3] Incoming Call Distribution Group—Miscellaneous
.
Default
0 s
