2.5 Utility
60
PC Programming Manual
To view the error log
•
From the
Utility
menu, select
Error Log
.
2.5.9
Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Displays reference signaling bit information for all channels of the T1 card, by monitoring sent and
received A, B, C and D bits. This utility is intended for use by dealers.
This option is only available at Installer level, and requires that the target T1 card be set to INS status.
While monitoring is being performed, any displayed bits whose value changes from 0 to 1 or vice
versa will be highlighted in red until the next screen refresh is performed.
To view signaling bit information
1.
From the
Utility
menu, select
T1 Signaling Bit Monitor
.
2.
From the
Slot No
drop-down list, select the target slot.
3.
From the
Interval Timer
drop-down list, select the number of seconds between each automatic
screen refresh.
Sub Code
The 5-digit sub code of the relevant hardware. (XYYZZ)
•
X: Shelf number
KX-TDA50/KX-TDA100/KX-TDA200: 1
KX-TDA600:
•
1: Basic Shelf
•
2: Expansion Shelf 1
•
3: Expansion Shelf 2
•
4: Expansion Shelf 3
•
YY: Slot number
KX-TDA50: 00 to 11 (00: MPR slot; 01: Fixed slot, 02 to
04: Free slot type A, 05 to 07: Free slot type B, 08 to 11:
Option slot)
KX-TDA100: 00 to 06 (00: MPR slot; 01 to 06: Free slot)
KX-TDA200: 00 to 11 (00: MPR slot; 01 to 11: Free slot)
KX-TDA600:
•
Basic Shelf: 00 to 10
(00: EMPR Card Slot; 01 to 10: Free Slots)
•
Expansion Shelf: 01 to 12
(01 to 11: Free Slots; 12: BUS-S Card Slot)
•
ZZ: Physical port number (01 to 16)
For OPB3 card, sub slot number (1 to 3) + port number (1
to 4) will be displayed as follows:
•
Sub slot 1 of OPB3: 11 to 14
•
Sub slot 2 of OPB3: 21 to 24
•
Sub slot 3 of OPB3: 31 to 34
Error Message
A description of the error.
Item
Description
