2.14 [8] ARS
620
PC Programming Manual
2.14 [8] ARS
2.14.1 [8-1] System Settings
Automatic Route Selection (ARS) automatically selects the appropriate carrier at the time a CO line
call is made, according to the programmed settings. The user-dialed number will be checked and
modified in order to connect it to the appropriate carrier.
ARS Mode
Selects the condition to determine when to operate ARS.
Default
Off
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using Idle Line
Access method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using Idle Line
Access, CO Line Access, or S-CO Line Access method.
Maintenance Console Location
2.14.1 [8-1] System Settings
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
1.3.14 CO Line Access
Mode When Any Carrier is not programmed for the Dial
Selects what happens when the dialed number is not found in
Leading Number
in
2.14.2 [8-2]
Leading Number
.
Default
Local Access
Value Range
Disconnect: the line will be disconnected.
Local Access: the dialed number will be handled by Idle Line Access method.
Maintenance Console Location
2.14.1 [8-1] System Settings
