2.14 [8] ARS
PC Programming Manual
623
Time-A–D—Setting
Enables the setting of the start time for each time block.
Default
Time-A–Time-C: Enable
Time-D: Disable
Value Range
Disable, Enable
Maintenance Console Location
2.14.4 [8-3] Routing Plan Time—Time Setting
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Time-A–D—Hour, Minute
Specifies the start time for each time block.
Default
Time-A: 8:00, Time-B: 17:00, Time-C: 21:00, Time-D: Not applicable.
Value Range
00:00–23:59
Maintenance Console Location
2.14.4 [8-3] Routing Plan Time—Time Setting
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
2.14.5 [8-4] Routing Plan Priority
The carrier priority (1 through 6) in a Routing Plan Table can be programmed for each time zone of
each day of the week. Select the desired Routing Plan Table number from the
Routing Plan
list.
Select the desired day of the week by clicking the applicable tab.
Time-A–Time-D
Specifies the carrier to be given priority for each time zone.
