2.5 Utility
64
PC Programming Manual
To view CS information
1.
From the
Utility
menu, select
CS Information
.
2.
From the
Target CSI/F Slot No
drop-down list, select the target slot.
•
To display information on a single card, select the slot number and name of that card.
•
To display information on all matching cards, select "ALL".
3.
From the
Interval Timer
drop-down list, select the number of seconds between each automatic
screen refresh.
4.
Click
Start
to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click
Refresh
.
5.
Click
Stop
to end monitoring.
2.5.15 Utility—PS Information
Displays Portable Station (PS) registration information, including the associated Cell Station (CS).
This option is only available at Installer level.
The displayed items are as follows:
Status
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left
blank.
Version
Version number of the program file stored in the CS
Revision
Revision number of the program file stored in the CS
CSID
12-digit ID number of the CS
Path
Number of the wireless extension currently using each path. In the
case of a group, several extensions may be using the same floating
extension number.
When an extension number is not registered, the display shows
"OFF". PSs can use up to 3 paths (KX-TDA100/KX-TDA200/KX-
TDA600) or 2 paths (KX-TDA50).
Group Call
Number of PSs registered to the attached CS that are members of
a PS Ring Group.
Item
Description
PS No.
PS location number.
Only registered PSs will be displayed.
Extension Number
Extension number of the PS.
Location—Slot
Slot number of the CS that the PS is registered with.
Location—Port
Port number of the CS that the PS is registered with.
Item
Description
