2.5 Utility
PC Programming Manual
65
To view PS information
1.
From the
Utility
menu, select
PS Information
.
2.
Click
Refresh
.
2.5.16 Utility—Timed Update (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Updates programs in the LPR cards (optional service cards with local processors) by comparing them
with files found on the SD memory card on a preset schedule, and downloading newer files to the
cards.
This option is only available at Installer level.
It is recommended to set the timed update to take place during the least active time period, for
example late at night.
Cards are automatically set to OUS status during an update, and returned to INS status when the
update is complete.
This utility does not apply to CS programs. These must be updated manually using the
SD Card File
View and Load
utility (see
2.5.4 Utility—SD Card File View and Load
).
When this utility has been set, all commands that would affect the status of cards are prevented from
operating.
The list of these commands is as follows:
•
Card status change (INS/OUS)
•
Diagnosis commands
•
Card installation
•
Card deletion
•
Remote reset
•
LPR program download requests
•
Signaling Bit Monitor requests (T1)
•
Line trace start requests (T1)
•
ISDN/QSIG Protocol Data Trace start requests
•
Time setting
•
CS program download requests
•
File deletion
When a function other than those listed above, that cannot be performed while Timed Update has
been set, is selected, an error message will be displayed.
To turn this utility on:
1.
From the
Utility
menu, select
Timed Update
.
2.
Select the
Set
option.
The time setting box will become available.
3.
Enter the desired time using the number keys.
Click in the hour or minute field and use the up and down arrows to adjust the displayed time in
increments of one unit.
4.
Click
Apply
.
