2.17 [11] Maintenance
672
PC Programming Manual
External Modem Command—Automatic Initialization
Specifies the command to automatically initialize an external modem when it is plugged into the Serial
Interface (RS-232C) port of the PBX.
Default
AT&F0Q0E0V1S0=1X0&D0
Value Range
Max. 30 characters
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
None
Feature Manual References
1.13.6 PC Programming
External Modem Command—Manual Initialization 1–Manual Initialization 5
Specifies the command to manually initialize an external modem. The command specified here is
controlled by PT system programming (External Modem Control [801]).
Default
Not stored.
Value Range
Max. 30 characters
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
None
Feature Manual References
1.13.6 PC Programming
Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the
PBX detects a PBX error, the System Alarm button on the PT turns on red. When this button is
pressed, the display will show the error number, and the button light will turn off automatically.
