2.6 Help
PC Programming Manual
73
A
•
Perform the following steps:
1.
Confirm that the Numbering Plan you will change is not currently being used by any
extensions (see
2.4.6 Tool—Extension List View
).
If it is being used by extensions, temporarily change the extension numbers of those
extensions to that of another numbering plan, or delete the extension number (see
2.10.1 [4-1-1] Wired Extension—Extension Settings
and
2.10.10 [4-2-1]
Portable Station—Extension Settings
).
2.
Clear the
Leading Number
cell.
3.
Click
Apply
.
4.
Modify the
No. of Additional Digits
cell as required.
5.
Click
Apply
.
6.
Enter the desired value in the
Leading Number
cell.
7.
Click
Apply
.
8.
Set all extension ports to OUS status.
9.
On the relevant screens, set the extension numbers of extensions to the desired
values.
10.
Set all extension ports back to INS status.
Q
When modifying the Numbering Plan, I cannot change the Leading Number.
A
•
It is not possible to use the same Leading Number for 2 extension blocks, or to use a
number that could possibly overlap with another Leading Number.
So, for example, if "2" is already set as a Leading Number it is not possible to set "21" as
another Leading Number because of the possible overlap of extension numbers.
The number you are trying to store cannot be used if it is already being used by:
•
A feature number
•
Another extension block
•
A Dial setting (see
2.15.1 [9-1] TIE Table
)
•
Quick Dialing (see
2.8.9 [2-6-2] Numbering Plan—Quick Dial
)
In any of these cases, choose another number.
Q
When modifying the Numbering Plan, how do I set a 1-digit extension number?
A
•
Perform the following steps:
1.
Clear the
Leading Number
cell.
2.
Click
Apply
.
3.
Set
No. of Additional Digits
to "None".
4.
Click
Apply
.
5.
Enter the desired value in the
Leading Number
cell.
6.
Click
Apply
.
7.
Set all extension ports to OUS status.
8.
On the relevant screens, set the extension numbers of extensions to the desired
values.
9.
Set all extension ports back to INS status.
Q
How do I change a feature number?
