background image

1   Preparation

Please read the information in this section before installing or upgrading the SD Memory Card.

1.1  Introduction

This leaflet provides procedures for installing the SD Memory Card for Software Upgrade in a new Hybrid
IP-PBX, and also for upgrading system software from a previous version.
The types of SD Memory Card are as follows:

SD Memory Card

Supported PBX

KX-TDA5920

KX-TDA50

KX-TDA0920

KX-TDA100/KX-TDA200

KX-TDA6920

KX-TDA600

These procedures involve transferring files between the Hybrid IP-PBX, the SD Memory Card, and a PC
running Maintenance Console.
At any point during a procedure, you can use the SD Card File View and Load option from Maintenance
Console's Utility menu to view the header information of files on the SD Memory Card. This allows you to
confirm that the correct versions of relevant files have been copied to the SD Memory Card.
The procedures described in this leaflet use the following files, contained on the SD Memory Card:

Type

File

Description

System data file

DSSYS (KX-TDA5920)
DSYS (KX-TDA0920)
DLSYS (KX-TDA6920)

User-set PBX system data

MPR file

PSMPR (KX-TDA5920)
PMPR (KX-TDA0920)
PLMPR (KX-TDA6920)

Hybrid IP-PBX main
software

Language files

DLNGx (x=0-2)

Extension LCD language
data

Default value files

DSIxxx (KX-TDA5920)
DIxxx (KX-TDA0920)
DLIxxx (KX-TDA6920)

Default value data files

Feature access file

DSKEYSD (KX-TDA5920)
DKEYSD (KX-TDA0920)
DLKEYSD (KX-TDA6920)

Enhanced feature access
file

Throughout this leaflet, the files above are referred to by their type. Make sure to confirm the file name relevant
to your SD Memory Card.

CAUTION

The SD Memory Card poses a choking hazard. Keep the SD Memory Card out of reach of children.

In order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SD
ACCESS" LED is off before pressing the Reset Button.

Before touching the System Initialize Switch, discharge static electricity by touching ground or wearing
an earthing strap.

Document Version  2008-11  

SD Memory Card Installation/Upgrade Guide

3

1.1 Introduction

Summary of Contents for KX-TDA5920



















Reviews: