1.3 Telephone Features and Operation
Operating Manual
139
To exchange your settings with another extension
1.3.75 Walking Extension, Enhanced
In addition to exchanging the settings between extensions (Walking Extension), you can change the status
of your extension to "Service-in" or "Service-out" (Enhanced Walking Extension).
Service-in
: An extension is in use (normal status).
Service-out
: Extension Dial Lock (
→
1.3.24 Extension Dial Lock) and Do Not Disturb (DND) (
→
1.3.19 DND
(Do Not Disturb)) are activated on an extension, and the extension user cannot make unauthorized outside
calls nor receive calls.
This feature is useful when:
a)
one person uses the same extension settings at different locations, such as another branch office
or at home
b)
two or more people use the same telephone in turn
•
An extension personal identification number (PIN) is required to use this feature. Refer to
"1.3.26 Extension PIN (Personal Identification Number)" in "3.1.1 Programming Information".
•
Your previous extension will receive the old settings of your new extension.
•
Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
•
If you are using a KX-NT300 series telephone with a Bluetooth wireless headset, and
exchange the settings with another KX-NT300 series telephone user, you cannot use your
Bluetooth wireless headset at the other extension.
Bluetooth wireless headsets are registered on extensions themselves. Therefore, you have
to register a Bluetooth wireless headset on each desired extension. For details about
registration, refer to "Bluetooth Registration" in "3.1.2 Personal Programming".
Off-hook.
Enter
727
.
PT/SLT
your
extension no.
On-hook.
Dial
your
extension number.
extension PIN
Enter
extension PIN
(max. 10 digits).
2
7
7
D.Tone
PIN: Personal Identification Number
