Panasonic KX-TDE100 Installation Manual Download | Manualshive

Page: 20 / 294

background image

1.1 System Highlights

1.1.1 System Highlights

IPCMPR Card Features

The IPCMPR card (the preinstalled Main Processing card) includes the following features and resources:

VoIP Trunks/VoIP Extensions

The IPCMPR card allows the use of IP trunks (H.323/SIP) and IP telephones (IP-PTs, IP softphones, and
SIP Extensions). By connecting a DSP card to the IPCMPR card, these IP trunks and extensions can be
used. It is also possible to increase the number of IP trunks (max. 32) and extensions (max. 128) through
the purchase of activation key codes.

LAN Connection

The IPCMPR card is equipped with a LAN port allowing for the PBX to be connected to a LAN.

Computer Telephony Integration (CTI) Features

Connecting a PC to a DPT, or connecting a CTI Server to this PBX, allows functions of the PC, PBX and
extensions to be integrated. For example, detailed caller information can be taken from a database and
displayed on the PC as a call arrives, or the PC can dial numbers for the extension automatically.

Built-in Simplified Voice Message (SVM) Features

The IPCMPR card comes preinstalled with the SVM feature (2 channels), allowing for simple answering
machine services to be supported.

Internet Protocol (IP) Telephone Features

This PBX supports the following telephone features that use IP:

IP-PT Features

This PBX supports the connection of IP-PTs which function almost identically to normal PTs. However,
they connect to the PBX over a LAN and make and receive calls using IP. In addition, KX-NT300 series
IP-PTs support the following features:

–

Self Labelling (KX-NT366 only)

The LCDs featured next to the 12 flexible buttons of the KX-NT366 can be programmed to display
information regarding the setting of the corresponding flexible button. In addition, the flexible buttons
can be organised into 4 "pages" allowing you to assign a total of 4 items to each physical button.

–

Optional Modules

•

KX-NT307(PSLP1528) Bluetooth

®

Module:

Allows for a Bluetooth wireless headset to be connected to a KX-NT300 series IP-PT.

•

KX-NT303 Add-on 12 Key Module:
Allows for 12 additional flexible buttons to be connected to a KX-NT346 or KX-NT343.

•

KX-NT305 Add-on 60 Key Module:
Allows for 60 additional flexible buttons to be connected to a KX-NT346 or KX-NT343.

–

High Sound Quality

Calls between KX-NT300 series IP-PTs support G.722 CODEC allowing for high sound quality
conversations.

SIP (Session Initiation Protocol) Extensions

This PBX supports the connection of third party SIP supported IP telephones (hardphones and softphones).
SIP Extensions make and receive calls using IP.

IP Softphones

This PBX supports the connection of Panasonic IP softphones, providing IP-PT operations and features
using software on a PC.

20

Installation Manual

1.1.1 System Highlights

«
...
18
19
20
21
22
...
»

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

RAPTOR YFM660RR

Brand: Yamaha Pages: 424

Brand: Yamaha Pages: 342

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands