Panasonic KX-TDE100 Installation Manual Download

Page: 9 / 294

•

Make sure that the wall that the shelf will be attached to is strong enough to support the shelf. If not, it is
necessary for the wall to be reinforced.

•

Only use the wall mounting equipment (anchor plug, screws, metal bracket) included with the PBX.

•

When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.

•

When placing the metal bracket, make sure that the "TOP" arrow is pointing upward.

•

When this product is no longer in use, make sure to detach it from the wall.

•

Do not insert objects of any kind into this product through its slots and openings, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill
liquid of any kind on or in the product.

CAUTION

SAFETY REQUIREMENTS

For All Telephone Equipment

•

Unplug the product from the wall outlet before cleaning. Wipe the product with a soft cloth. Do not clean
with abrasive powders or with chemical agents such as benzene or thinner. Do not use liquid cleaners or
aerosol cleaners.

•

The product should be kept free of dust, moisture, high temperature (more than 40 °C) and vibration, and
should not be exposed to direct sunlight.

For the PBX

•

When relocating the equipment, first disconnect the telecom connection before disconnecting the power
connection. When the unit is installed in the new location, reconnect the power first, and then reconnect
the telecom connection.

•

The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near
the equipment and is easily accessible.

•

The SD Memory Card poses a choking hazard. Keep the SD Memory Card out of reach of children.

•

Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect it
from overheating, these openings must not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface while in use. The product should never
be placed near or over a radiator or other heat source. This product should not be placed in a sealed
environment unless proper ventilation is provided.

For the Cell Station
2.4 GHz Cell Station (Except for KX-TDA0151CN)
Medical

—consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they

are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range
of 2401 MHz to 2480 MHz, and the power output level can range from 0.004 W to 0.4 W.) Do not use the unit
in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.

2.4 GHz Cell Station (Only for KX-TDA0151CN)
Medical

—consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they

are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range
of 2401 MHz to 2480 MHz, and the output peak power level is less than 0.16 W.) Do not use the unit in health
care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF (radio frequency) energy.

DECT Cell Station

Installation Manual

Important Information