2.6.2 Utility—File Transfer PC to PBX (SD Card)
Copies PBX system files (programme files, data files and activation key files) from the connected PC to the
SD memory card installed in the PBX. Pre-existing files on the SD memory card are overwritten.
This option is only available at Installer level.
The following types of files can be copied using this tool:
•
Programme files: These contain the programmes used to operate cards within the PBX and CSs, acting
as on-board drivers.
•
Data files: These contain the initial configuration data for individual cards and settings.
•
Activation Key files: These contain the activation keys used to enable the use of IP trunks and IP telephones
through Virtual VoIP cards and upgrade the software.
Not all files that are copied using this tool are automatically made active. To install new programme files, main
system data, or activation key for software upgrade to the PBX, use the System Reset—Reset by the
Command utility (see
2.6.21 Utility—System Reset—Reset by the Command
) for PMMPR/PGMPR,
DMSYS/DGSYS, and LIC files. Use the Activation Key button (see
3.3 [1-1] Slot—Activation Key
) for other
LIC files, and the SD Card File View and Load utility (see
2.6.4 Utility—SD Card File View and Load
) for all
other files.
The PBX examines the header information of a file to determine 2 things: whether the file contains supported
data, and which system component the file applies to.
Only files whose header information matches that of a system file supported by the PBX can be transferred.
Attempting to transfer any other type of file results in an error message.
The names of all files that can be stored on the SD memory card are as follows:
Main Programme
KX-TDE100/KX-TDE200
Name on SD Memory Card
Corresponding Card
PMMPR
IPCMPR
PMMPR_S
IPCMPR
*1
*1
PMMPR-file-format data that is transferred to the PBX from the PC is saved as "PMMPR_S".
KX-TDE600
Name on SD Memory Card
Corresponding Card
PGMPR
IPCEMPR
PGMPR_S
IPCEMPR
*1
*1
PGMPR-file-format data that is transferred to the PBX from the PC is saved as "PGMPR_S".
LPR Programme
Name on SD Memory Card
Corresponding Card
PCSINF
CSIF
PDHLC
DHLC8, DLC8, DLC16
PC Programming Manual
67
2.6.2 Utility—File Transfer PC to PBX (SD Card)
Summary of Contents for KX-TDE100
