KX-NT321
IP Address*
1
Subnet Mask Address*
2
Default Gateway Address*
3
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address (if required)
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
Select "Network".
Press SP-PHONE.
Select "DHCP (Disable)".
Press SP-PHONE
twice.
Press SP-PHONE.
Select "Subnet Mask".
Press SP-PHONE.
Press SP-PHONE.
Select "Default GW".
Press SP-PHONE.
Press SP-PHONE.
Press HOLD to return
to the Menu screen.
To enter the IP address of the Secondary PBX (if required)
Select "PBX IP
Address".
Press SP-PHONE.
Select "PBX".
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
Press SP-PHONE.
PBX IP Address
Press HOLD twice to return
to the Menu screen.
Continued on next page
46
IP Networking Guide
4.3.1 Assigning the IP Addressing Information
Summary of Contents for KX-TDE100
