KX-NT321
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
To enter the IP address of the IP-EXT16 card in the Primary PBX (PBX IP Address)
To the VLAN settings
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
To set VLAN parameters
OR
Press HOLD twice to return
to the Menu screen.
Select "PBX IP
Address".
Press SP-PHONE.
Press SP-PHONE.
Press STORE.
Select "PBX".
Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (If required)
PBX IP Address
PBX IP Address
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT’s power off,
and (2) hold the STORE button and
2
key while turning the power on.
IP Networking Guide
55
4.3.1 Assigning the IP Addressing Information
Summary of Contents for KX-TDE100
