Setting an Extension Port to Use a DSS Console
1.
Under
Configuration
, click
Slot
.
2.
Move the mouse pointer over the desired extension
card to display the menu of options.
3.
Click
Ous
to set the card to out-of-service status.
4.
Move the mouse pointer over the card again, then click
Port Property
.
5.
For
DPT Type
, set the
Type
to
DSS
and assign the
Location No.
6.
Click
OK
.
7.
Under
Extension
, click
DSS Console
.
8.
Select the desired pair extension number from
Pair
Extension
.
9.
Assign features to flexible buttons as required.
10.
Click
OK
.
11.
Under
Configuration
, click
Slot
.
12.
Move the mouse pointer over the card to display the
menu of options.
13.
Click
INS
to set the card to in-service status.
14.
Click
Close
.
Getting Started for Physical Cards
27
4.1 Programming the PBX
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM
