Getting Started
11
Battery installation
L
USE ONLY Ni-MH batteries AAA (R03)
size.
L
Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L
Confirm correct polarities (
S
,
T
).
Battery charging
Charge for about 7 hours.
L
When the batteries are fully charged, the
charge indicator goes off and
“
Fully
charged
”
is displayed.
Note when setting up
Note for connections
L
The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
During a power failure
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack using a T-adaptor.
Note for battery installation
L
Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 7.
L
Wipe the battery ends (
S
,
T
) with a dry
cloth.
L
Avoid touching the battery ends (
S
,
T
) or
the unit contacts.
Note for battery charging
L
It is normal for the handset to feel warm
during charging.
L
Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Clean more often if the
unit is exposed to grease, dust, or high
humidity.
L
When the language selection is
displayed, see page 14.
Rechargeable Ni-MH ONLY
Charge indicator
Confirm
“
Charging
”
is displayed.
PNQX3129YA.book Page 11 Monday, January 23, 2012 4:41 PM