Preparation
12
Setting the date and time
Important:
L
Confirm that the AC adaptor is connected.
L
Ensure that
w
is not flashing. If the
handset is in screen saver mode,
w
is not
displayed. Press
{ih}
to turn the
display on.
1
Press
$
(middle soft key).
2
Select
b
, then press
,
.
3
Select
“
Set Date & Time
”
, then press
,
.
4
Enter the current day, month and year by
selecting 2 digits for each.
Example:
17 May, 2005
Press
{
1
}{
7
}
{
0
}{
5
}
{
0
}{
5
}
.
5
Enter the current hour and minute by
selecting 2 digits for each.
L
You can select
“
AM
”
,
“
PM
”
or 24-hour
time entry by pressing
{*}
repeatedly.
Example:
3:30 PM
Press
{
0
}{
3
}
{
3
}{
0
}
, then press
{*}
repeatedly until
“
03:30 PM
”
is
displayed.
6
Press
,
.
7
Press
{ih}
.
Note:
L
To correct a digit, press
{<}
or
{>}
to
move the cursor, then make the
correction.
L
The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
TG1850NZ(e).book Page 12 Monday, December 27, 2004 3:22 PM
