27
For assistance, please visit http://shop.panasonic.com/support
Programming
Default settings by reset
Phonebook
Unchanged
Speed dial
Unchanged
Ring volume (Handset)
5
Ring volume (Base unit)
5
Ring tones
*1
1
Silent mode
*1
Off
Silent mode
*1
(Start time)
08.00PM
Silent mode
*1
(End time)
08.00AM
Key tone
On
Docking tone
*1
On
Battery tone
*1
On
Handset name
*1
Unchanged
Date & time
Unchanged
Language
English
Auto answer
*1
Off
Auto hang-up
On
Alarm
*1
Off
Call block (Unknown call)
Off
Call block (Block mode)
Off
Call block (Block number)
Unchanged
Area code
Empty
Flash time
700ms
Dial mode
Tone
Auto clock
Unchanged
Change PIN
0000
Caller list
Unchanged
Redial list
Unchanged
Receiver/speaker volume
(Handset)
3
Receiver/speaker volume
(Base unit)
3
Handset equalizer
*1
Alto
Answering system
On
Answering mode
Record also
Greeting message
Use default
Recording message
Unchanged
5
Enter the 4-digit PIN code (default = 0000),
press
L
OK
R
.
A beep will be heard if the registration is
successful. The handset is automatically
assigned an available handset number. Use this
number when making intercom calls.
Note:
● If registration is not successful the first time,
please repeat the process again in case the
base unit registration period ran out of time.
If the base unit is not found after about 120
seconds, the handset returns to standby. Try
registering again.
De-registering a handset
A handset can cancel other handsets registered
to the same base unit. This allows the handset to
end its wireless connection with the system.
Handset / Base unit
1
L
Menu
R
,
L
d
R
“Advanced set”
, press
L
OK
R
.
2
L
d
R
“Deregister”
, press
L
OK
R
.
3
Enter the 4-digit PIN code (default = 0000),
press
L
OK
R
.
4
L
d
R
to select the handset that needs to be
de-registered, press
L
OK
R
. A confirmation
beep will be heard and the display will return
to standby.
Restore default settings
The phone can be restored to its default (original)
settings. All the handsets that are registered to
the base unit will be retained.
IMPORTANT
Current handset and base unit settings will be
reset. Some contents will be retained even if you
reset the phone setting. See “Default settings by
reset” for details.
Handset / Base unit
1
L
Menu
R
,
L
d
R
“Advanced set”
, press
L
OK
R
.
2
L
d
R
“Reset”
, press
L
OK
R
.
3
The display shows
“Confirm?”
.
4
Proceed with the operation for your unit.
Handset:
L
OK
R
to confirm or
L
OFF
R
to return to
standby.
Base unit:
L
OK
R
to confirm or
L
EXIT/STOP
R
to return to standby.
The phone will restart automatically.