Programmable Settings
36
To turn dial lock off
1
Press
{
MENU
}
.
2
Scroll to “
Dial lock
” by pressing
{V}
or
{^}
, then press
{
>
}
.
3
Enter the same password that was
entered when dial lock was turned on.
4
Press
{
Save
}
.
5
Press
{
Yes
}
.
L
“
Dial lock off
” will be displayed.
6
Press
{
OFF
}
.
Note:
L
If you forget the password, consult your
nearest Panasonic service center.
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1
Press
{
MENU
}
.
2
Scroll to “
Initial setting
” by
pressing
{V}
or
{^}
, then press
{
>
}
.
3
Scroll to “
Key tone
” by pressing
{V}
or
{^}
, then press
{
>
}
.
4
Press
{V}
or
{^}
repeatedly to select
“
On
” or “
Off
”.
5
Press
{
Save
}
, then press
{
OFF
}
.
Re-registering the handset
If “
No link to base. Move closer
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
L
Make sure the base unit is not being
used.
L
Have the handset and base unit near
each other when re-registering the
handset.
L
KX-TG2424BX only:
Confirm the extension number of the
handset which has lost the
communication by placing the handset
on the base unit or charger.
If you re-register the handset using the
other handset’s extension number
[1]
or
[2]
, the other handset will not
function.
1
Handset:
Press
{
MENU
}
.
2
Scroll to “
Initial setting
” by
pressing
{V}
or
{^}
, then press
{
>
}
.
3
Scroll to “
Registration
” by pressing
{V}
or
{^}
, then press
{
>
}
.
4
KX-TG2423BX base unit:
Press and hold
{
HANDSET
LOCATOR
}
until the CHARGE
indicator flashes.
KX-TG2424BX base unit:
Press and hold the handset locator
button that corresponds to the handset
you want to re-register (
{
HANDSET
LOCATOR
1
}
or
{
HANDSET
LOCATOR
2
}
) until the CHARGE
indicator flashes.
L
After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
5
Handset:
Press
{
OK
}
, then wait until the handset
beeps.
L
Registration is complete.
TG2423BX_2424BX(e).book Page 36 Thursday, April 14, 2005 11:49 AM
