Useful Information
38
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Cause/solution
Busy
L
The called handset is in use.
L
The handset you are calling is too far from the base unit.
L
Other units are in use and the system is busy. Try again
later.
Dial locked
L
Dial lock is turned on. To turn it off, see page 22.
Error
L
The handset’s registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.
L
The entered password was wrong in programming dial
lock. Enter the correct password.
L
The other handset is not registered.
No items stored
L
Your phonebook or redial list is empty.
No link
L
The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L
Confirm that the base unit’s AC adaptor is plugged in.
L
Raise the base unit antenna.
L
The handset’s registration may have been canceled.
Re-register the handset (page 35).
Phonebook full
L
There is no space to store new items in the phonebook.
Erase unnecessary items (page 24).
Please lift up.
L
A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
TG2620CN_2622CN.book Page 38 Friday, December 15, 2006 9:25 AM