Preparation
10
Setting up the base
unit
Connecting the AC adaptor
and telephone line cord
Connect the telephone line cord until it
clicks into the base unit and telephone
line socket (
A
). Connect the AC
adaptor cord (
B
) by pressing the plug
firmly (
C
).
L
Use only the included Panasonic AC
adaptor PQLV203AL.
Note:
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the
adaptor may cause it to become
disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same
telephone line or to the same
telephone socket using a BT double
adaptor.
L
The unit is not designed to be used
with rotary (pulse dialling) services.
L
The unit’s answering system will not
answer incoming calls on your
FaxAbility number.
If you subscribe to an ADSL service
Please attach a noise filter (contact your
ADSL provider) to the telephone line
between the base unit and the
telephone line socket in the event of the
following:
– Noise is heard during conversations.
– Caller ID features do not function
properly.
Setting up the handset
Connecting the AC adaptor
L
Use only the included Panasonic AC
adaptor PQLV208AL.
(230–240 V AC,
50/60 Hz)
A
B
To single-line
telephone socket
Hooks
C
Available model:
KX-TG3022/KX-TG3032/
KX-TG3033
To single-line
telephone socket
Noise filter
