background image

Useful Information

37

For assistance, please visit http://www.panasonic.com/help

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

*1 KX-TG4021/KX-TG4071 series: page 3

Troubleshooting

If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the 
batteries from the handset, and then insert the batteries into the handset again.

General use

Display message

Cause/solution

Busy

L

The called unit is in use.

L

Other units are in use and the system is busy. 
Try again later.

L

The handset you are using is too far from the 
base unit. Move closer and try again.

L

There is no handset registered to the base 
unit matching the handset number you 
entered.

Error!!

L

Recording was too short. Try again.

*1

No link to base. 
Reconnect main base AC 
adaptor.

L

The handset has lost communication with the 
base unit. Move closer to the base unit and try 
again.

L

Unplug the base unit’s AC adaptor to reset the 
unit. Reconnect the adaptor and try again.

L

The handset’s registration may have been 
canceled. Re-register the handset (page 23).

Problem

Cause/solution

The handset does not turn 
on even after installing 
charged batteries.

L

Place the handset on the base unit or charger to 
turn on the handset.

TG401x.book  Page 37  Friday, December 3, 2010  1:36 PM

Summary of Contents for KX-TG4025





















































Reviews: