(4)
Cargue aproximadamente durante 7 horas.
L
Cuando las baterías estén completamente cargadas, el indicador de carga se
apagará y aparecerá
“
Carg. Comp.
”
.
Nota:
L
Si las baterías están completamente cargadas pero el tiempo de
funcionamiento parece ser más corto, limpie los extremos de las baterías (
S
,
T
) y los contactos de carga con un paño seco y cárguelas de nuevo.
Cómo registrar un auricular a una unidad base
1
Unidad base:
Oprima y mantenga oprimido
{
LOCATOR
}
durante aproximadamente 5
segundos hasta que suene el tono de registro.
L
Si todos los auriculares registrados comienzan a timbrar, oprima
{
LOCATOR
}
de nuevo para detenerlos y después repita este paso.
2
Auricular:
Coloque el auricular en la unidad base o cargador, y espere hasta que suene
un pitido largo y aparezca
w
.
Nota:
L
Si suena un tono de error, o si se muestra
_
, registre el auricular de acuerdo
con las instrucciones de operación de la unidad base.
Indicador de carga
SOLO baterías
Ni-MH recargables
Confirme que
aparezca
“
Cargando
”.
TGA410(sp).fm Page 4 Friday, November 5, 2010 7:02 PM