Programming
22
For assistance, please visit http://www.panasonic.com/help
Main menu:
a
“
Customer support
”
*12
*1 If you program these settings using one of the handsets, you do not need to program the same
item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only) To use this feature, set the date and time first (page 12).
*4 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
5). If you select a melody, you cannot distinguish lines by their ringers.
*6 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*7 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
*8 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*10The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier
if necessary. The setting should stay at
“
700 ms
”
unless pressing
{
FLASH
}
fails to pick up
the waiting call.
*11Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set the
line mode to
“
A
”
if telephone line condition is not good.
*12The handset can display the Internet address where you can download the operating
instructions or get further information for this product, using your computer.
Change language
Display
1
: <
English
>
2
:
Español
#110
13
Voice prompt
*1
1
: <
English
>
2
:
Español
#112
13
Operation
Code
+
Displaying customer support Web address.
#680
–
Sub-menu 1
Sub-menu 2
Setting
Code
+
TG413x(e).book Page 22 Tuesday, December 7, 2010 8:01 AM
Summary of Contents for KX-TG4132
Page 55: ...Notes 55 ...
