background image

Useful Information

58

For assistance, please visit http://www.panasonic.com/consumersupport

Error messages

If the unit detects a problem, one of the following messages will be displayed on the 
handset.

Display message

Cause & solution

Busy

L

The base unit user is listening to messages and cannot 
be paged.

Error!!

L

When you tried to register the handset, the handset and 
the base unit could not link for some reason, such as 
interference from electrical appliances. Move the 
handset and the base unit away from the electrical 
appliances and try again.

Invalid

L

You cannot rename the preset song.

Memory full

L

There is no space in memory to record new songs. 
Erase unnecessary songs.

No items stored

L

Your phonebook or redial list is empty.

No link to base. 
Move closer to 
base, try again.

L

The handset has lost communication with the base unit. 
Move closer to the base unit, and try again.

L

Confirm that the base unit’s AC adaptor is plugged in.

L

Raise the base unit antennas.

L

The handset’s registration may have been canceled. 
Re-register the handset (page 43).

Not erasable

L

You cannot erase the preset song.

Phonebook full

L

There is no space to store new items in the phonebook. 
Erase unnecessary items (page 24).

Please lift up and 
try again.

L

A handset button was pressed while the handset was 
on the base unit. Lift the handset and press the button 
again.

System is busy. 
Please try again 
later.

L

The handset has lost communication with the base unit. 
Move closer to the base unit, and try again.

L

Another user is listening to messages. Try again later.

Summary of Contents for KX-TG5456













































































Reviews: