Programming
12
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
3
Handset:
Wait until
“
Bázis PIN
”
is displayed.
i
Enter the base unit PIN (default:
“
0000
”
).
i
M
L
If you forget your PIN, contact an
authorised service centre.
L
When the handset has been
registered successfully,
w
is
displayed.
Megjegyzés:
L
While registering,
“
Bázisállomás
regisztráció
”
is displayed on all
registered handsets.
TG6511-6521HG(e-hg).book Page 27 Friday, February 26, 2010 8:40 AM
Fontos:
L
The additional handset model
recommended for use with this unit is
noted on 4. oldal. If another handset model
is used, certain operations (handset
settings, base unit settings, etc.) may not
be available.
Registering a handset to the base
unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is
not registered to the base unit (for example,
_
is displayed even when the handset is
near the base unit), re-register the handset.
1
Handset:
8
i
{
#
}{
1
}{
3
}{
0
}
2
Base unit:
Proceed with the operation for your
model.
■
KX-TG
5511
Press and hold
{x}
for about 5
seconds. (No registration tone)
■
KX-TG
5521
Press and hold
{x}
for about 5
seconds, until the registration tone
sounds.
L
If all registered handsets start ringing,
press the same button to stop. Then
repeat this step.
L
The next step must be completed
within 90 seconds.
L
When you purchase an additional
handset, refer to the additional handset’s
installation manual for registration.
Deregistering a handset
A handset can cancel its own registration (or
the registration of another handset) that is
stored to the base unit. This allows the
handset to end its wireless connection with
the system.
1
8
i
{
#
}{
1
}{
3
}{
1
}
L
All handsets registered to the base
unit are displayed.
2
{V}
/
{^}
: Select the handset you want to
cancel.
i
M
3
{V}
/
{^}
:
“
IGEN
”
i
M
L
A confirmation tone sounds.
L
The handset does not beep when
cancelling its own registration.
4
{i
c
}
