Preparation
12
Setting up the base unit
Connecting the AC adaptor and
telephone line cord
Connect the telephone line cord until it
clicks into the base unit (
A
) and telephone
line jack (
B
). Connect the AC adaptor cord
by pressing the plug firmly (
C
).
L
Use only the included Panasonic AC
adaptor PQLV1AL.
Note:
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using a BT double adaptor.
L
The unit is not designed to be used with
rotary (pulse dialling) services.
If you subscribe to an ADSL service
Please attach a noise filter (contact your
ADSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 26) do not
function properly.
Hook
(230–240 V AC,
50/60 Hz)
A
B
C
To single-line
telephone jack
To single-line
telephone jack
Noise filter
Summary of Contents for KX-TG5921NZ
Page 50: ...50 Notes ...
Page 51: ...51 Notes ...
