Useful Information
For assistance, please visit http://www.panasonic.com/help
45
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
I fully charged the battery,
but
7
continues to flash,
or
8
is displayed.
L
Clean the charge contacts and charge again
(page 11).
L
The battery may need to be replaced with a new
one (page 10).
The handset display is
blank.
L
Confirm that the battery is properly installed.
L
Fully charge the battery (page 10).
While charging, the charge
indicator does not light and
“
Charge for 7h
” is
displayed.
L
The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and “
Charging
” is displayed.
Problem
Cause/solution
Static is heard, sound cuts
in and out. Interference
from other electrical units.
L
Move the handset and base unit away from
other electrical appliances.
L
Move closer to the base unit.
L
Turn on the clarity booster feature (page 17).
L
If your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
The handset does not ring.
L
The ringer volume is turned off. Adjust it (page
27).
The base unit does not
ring.
*1
L
The ringer volume is turned off. Adjust it (page
16).
I cannot make a call.
L
The dialing mode may be set incorrectly.
Change the setting (page 14).
L
Another handset is in use. Try again later.
I cannot have a
conversation using the
headset.
L
Make sure that an optional headset is
connected properly (page 41).
L
If “
SP-phone
” is displayed on the handset,
press
{C}
to switch to the headset.
I cannot make long
distance calls.
L
Make sure that you have long distance service.
I cannot page the handset.
L
The called handset is too far from the base unit.
L
The called handset is in use. Try again later.
I cannot page the base
unit.
*1
L
The base unit is in use. Try again later.
TG602X_605X.book Page 45 Thursday, February 8, 2007 2:39 PM