Voice Mail Service
38
Listening to Voice Mail
messages
The unit lets you know that you have
new Voice Mail messages in the
following ways:
– “
New Voice Mail
” is displayed on
the handset.
– The message indicator on the
handset flashes slowly if message
alert feature is turned on (page 38).
1
Press
{C}
, then press
{
VM
}
within
15 seconds.
OR
{
MENU
}
i
{V}
/
{^}
: “
V.M.
access
”
i
{
Select
}
L
The speakerphone turns on.
2
Follow the prerecorded instructions.
3
When finished, press
{
OFF
}
.
Note:
L
If
{
VM
}
is not displayed, the Voice
Mail access number has not been
stored. Store the number (page 37).
L
If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding
{
OFF
}
until the handset beeps.
L
If your Voice Mail service uses Voice
Mail tones and the message is over 3
minutes long, the handset may not
indicate new messages.
L
If your Voice Mail service uses Voice
Mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to Voice Mail messages, you
have to dial your access number
manually.
Message alert
You can select whether or not the
message indicator on the handset
flashes slowly when there are new
recorded messages in the Voice Mail
system.
The default setting is “
Off
”.
Important:
L
If there are new answering system
messages present (page 31), the
message indicator also flashes
slowly.
1
{
MENU
}
i
{
0
}{#}
2
{V}
/
{^}
: Select the desired setting.
3
{
Save
}
i
{
OFF
}
Note:
L
While message alert is on, battery
operating time is shortened (page 11).
Handset
Handset
TG6072C_6073C(e).book Page 38 Thursday, February 1, 2007 2:14 PM
