Introduction
8
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
5.76 GHz to 5.84 GHz, and the power
output is 200 mW (max.).) Do not use
the product in health care facilities if
any regulations posted in the area
instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
L
For maximum coverage and noise-
free communications, place your
base unit:
– at a convenient, high, and central
location with no obstructions
between the handset and base unit
in an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices or
other phones.
– avoid facing radio frequency
transmitters, such as external
antennas of mobile phone cell
stations (avoid putting the base unit
on a bay window or near a window).
L
Coverage and voice quality depends
on the local environmental conditions.
L
If the reception for a base unit location
is not satisfactory, move the base unit
to another location for better
reception.
Environment
L
Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
L
The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
L
The product should not be exposed to
direct sunlight.
L
Do not place heavy objects on top of
the product.
L
When you leave the product unused
for a long period of time, unplug the
product from the power outlet.
L
The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. It should not be
placed in rooms where the
temperature is less than 5 °C (41 °F)
or greater than 40 °C (104 °F). Damp
basements should also be avoided.
L
The maximum calling distance may
be shortened when the product is
used in the following places: Near
obstacles such as hills, tunnels,
underground, near metal objects such
as wire fences, etc.
L
Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Routine care
L
Wipe the outer surface of the product
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
TG6072C_6073C(e).book Page 8 Thursday, February 1, 2007 2:14 PM
