Making/Answering Calls
16
Using the base unit
1
{
SP-PHONE
}
2
Dial the phone number.
3
When the other party answers,
speak into the MIC.
L
Speak alternately with the other
party.
4
When you finish talking, press
{
SP-PHONE
}
.
Note:
L
Use the speakerphone in a quiet
environment.
L
While on a call, you can switch from
the base unit to the handset:
– Press
{C}
on the handset, then
press
{
SP-PHONE
}
on the base
unit.
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press
{
>
}
or
{
<
}
repeatedly while
talking.
Redialing the last number dialed
{
SP-PHONE
}
i
{
REDIAL
}
Answering calls
When a call is being received, the ringer
indicator on the handset and the IN
USE indicator on the base unit flash
rapidly.
Using the handset
1
Press
{C}
or
{s}
.
L
You can also answer the call by
pressing any dial key from
{
0
}
to
{
9
}
,
{*}
,
{#}
, or
{
INTERCOM
}
.
(Any key talk feature)
2
When you finish talking, press
{
OFF
}
.
Note:
L
You can change the ringer indicator
colour and the ringer tone (page 29).
You can also adjust the handset
ringer volume (page 29).
Auto talk
This feature allows you to answer a call
by simply lifting the handset off the base
unit or charger. You do not need to
press
{C}
. To activate this feature, see
Temporary ringer off
While the handset is ringing for an
outside call, you can turn the ringer off
temporarily by pressing
{
OFF
}
.
Using the base unit
1
{
SP-PHONE
}
2
Speak into the MIC.
3
When you finish talking, press
{
SP-PHONE
}
.
Adjusting the ringer volume
Press
{
>
}
or
{
<
}
repeatedly to select
the desired volume.
L
To turn the ringer off, press and hold
{
<
}
until the unit beeps 2 times.
TG6072C_6073C(e).book Page 16 Thursday, February 1, 2007 2:14 PM
