Multi-unit Operation
40
4
To complete the transfer:
Press
{
OFF
}
.
L
The outside call is being routed to
the unit.
To establish a conference call:
Press
{
Conf
}
.
L
To leave the conference, press
{
OFF
}
. The other parties can
continue the conversation.
L
To put the outside call on hold,
press
{
HOLD
}
. To resume the
conference, press
{
Conf
}
.
1
During an outside call, press
{
LOCATOR/INTERCOM
}
to put the
call on hold.
2
To page a specific handset, enter its
extension number (
{
1
}
–
{
4
}
).
To page all handsets, press
{
0
}
or
wait for a few seconds.
3
Wait for the paged party to answer.
L
If the paged party does not answer,
press
{
LOCATOR/INTERCOM
}
to
return to the outside call.
4
To complete the transfer:
Press
{
SP-PHONE
}
.
L
The outside call is being routed to
the handset.
To establish a conference call:
Press
{
CONF
}
.
L
To leave the conference, press
{
SP-PHONE
}
. The other parties
can continue the conversation.
L
To put the outside call on hold,
press
{
HOLD
}
. To resume the
conference, press
{
CONF
}
.
Answering transferred calls
Press
{C}
to answer the page.
Press
{
SP-PHONE
}
to answer the
page.
Note for handset and base unit:
L
After the paging party disconnects,
you can talk to the outside caller.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1
Handset:
{
MENU
}
i
{
0
}{
0
}{
1
}
2
Base unit:
Press and hold
{
LOCATOR/
INTERCOM
}
until the IN USE
indicator flashes.
L
After the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3
Handset:
Press
{
OK
}
, then wait until a beep
sounds.
4
{
OFF
}
Registering an additional handset
See page 4 for information on the
available model.
Start from step 2.
Deregistering a handset
1
{
MENU
}
i
{
0
}{
0
}{
2
}
2
{
3
}{
3
}{
5
}
i
{
OK
}
3
Select the handset you want to
cancel by pressing the desired
handset number (
{
1
}
–
{
4
}
).
Base unit
Handset
Base unit
TG6072C_6073C(e).book Page 40 Thursday, February 1, 2007 2:14 PM
