Programming
25
Special programming
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
L
Set the date and time beforehand
(page 13).
1
8
i
{
#
}{
7
}{
2
}{
0
}
2
{V}
/
{^}
: Select the desired alarm
option.
i
M
3
Enter the desired date and month.
i
M
4
Set the desired time.
i
M
5
{V}
/
{^}
: Select the desired alarm
tone.
i
M
L
We recommend selecting a
different ringer tone from the one
used for outside calls.
6
M
i
{i
c
}
L
When the alarm is set,
E
is
displayed.
Note:
L
To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L
When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Changing the handset name
Each handset can be given a
customised name (“Bob”, “Kitchen”,
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is
“
Off
”
. If
you select
“
On
”
without entering any
handset name,
“
Handset 1
”
to
“
Handset 6
”
is displayed.
1
8
i
{
#
}{
1
}{
0
}{
4
}
2
Enter the desired name (max. 10
characters; page 38).
L
If not required, go to step 3.
3
M
4
{V}
/
{^}
: Select the desired setting.
i
M
2 times
5
{i
c
}
Storing an area code to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 29) will include area codes. If you
do not want to dial the area code when
making calls from the caller list, you can
store the area code which you want the
unit to delete automatically.
Example:
You have stored the area
code “09”. If you make a call from the
caller list to the phone number “09-456-
7890”, the unit dials “456-7890”.
1
8
i
{
#
}{
2
}{
5
}{
5
}
2
Enter an area code (5 digits max.).
i
M
i
{i
c
}
Note:
L
The use of this feature can prevent a
National Call from being dialled. E.g.,
in the case of the South Island, the
“03” will be omitted and will therefore
“
Off
”
Turns alarm off. Go to step 6.
“
Once
”
An alarm sounds once at the set
time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 4.
TG6521_6522NZ(e).book Page 25 Friday, April 16, 2010 2:15 PM
