Preparation
14
Note:
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack, if you have
such a telephone jack in your house.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Battery installation and
replacement
Important:
L
Use the supplied rechargeable
batteries (Part No. HHR-55AAAB).
L
When installing the batteries:
– Wipe the battery ends (
S
,
T
) with
a dry cloth.
– Avoid touching the battery ends
(
S
,
T
) or the unit contacts.
– Confirm correct polarities (
S
,
T
).
L
When replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
– We recommend using the
Panasonic rechargeable batteries
noted on page 5, 8.
1
Firmly press the notch on the
handset cover and slide it in the
direction of the arrow.
2
Insert the batteries negative (
T
)
end first. Close the handset cover.
To telephone line
DSL/ADSL filter
Rechargeable Ni-MH ONLY
TG7301-7321FX(e).book Page 14 Wednesday, March 26, 2008 5:19 PM
