Useful Information
46
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Static is heard, sound cuts in and
out. Interference from other
electrical units.
L
Place the handset and the base unit away from
other electrical appliances.
L
Move closer to the base unit.
L
Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
Noise is heard during a call.
L
You are using the handset or base unit in an area
with high electrical interference. Place the handset
and base unit away from interference sources, such
as antennas and mobile phones.
The handset/base unit stops
working while being used.
L
Disconnect the AC adaptor and turn off the
handset. Connect the AC adaptor, turn on the
handset and try again.
Pressing
B
does not display/dial
the last number dialled.
L
The redialled number was more than 24 digits long.
Redial the number manually.
Mute does not turn off after the line
is connected.
L
Press
{
C/
T
}
.
The handset beeps intermittently
and/or
3
flashes.
L
Fully charge the batteries (page 10).
I fully charged the batteries, but
3
still flashes.
L
Clean the charge contacts and charge again (page
10).
L
It is time to replace the batteries (page 10).
Caller information is not displayed.
L
You must subscribe to Caller ID service.
L
Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
While viewing caller information,
the display returns to standby
mode.
L
Do not pause for over 1 minute while searching.
I cannot register a handset to a
base unit.
L
The maximum number of base units (4) are already
registered to the handset. Cancel unused base unit
registrations from the handset (page 38).
L
The maximum number of handsets (6) are already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 38).
L
You entered the wrong PIN number. If you forget
your PIN, see “I cannot remember the PIN.” (page
47).
L
Place the handset and the base unit away from
other electrical appliances.
Problem
Cause & solution
TG8100-8120E(e).book Page 46 Friday, March 3, 2006 10:34 AM
