L
Base Unit Settings
23
Base unit settings
L
Use the handset to customise the base unit.
L
When customising the base unit, the current item or setting is highlighted.
To customise the base unit:
1
"
(middle soft key)
2
Select
L
by pressing
{^}
,
{V}
,
{
<
}
, or
{
>
}
.
i
#
(middle soft key)
3
Press
{^}
or
{V}
to select the desired item in the base unit settings menu.
i
#
4
Press
{^}
or
{V}
to select the desired item in the sub-menu.
i
#
5
Press
{^}
or
{V}
to select the desired setting then press
#
or follow the instruction in the
“Feature” column of the chart.
L
To exit the operation, press
{ih}
.
*1 Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 24):
CZ=100 msec.
SK=100 msec.
*3 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your nearest Panasonic service centre.
Base unit settings
menu
Sub-menu
Feature (default setting)
Ringer Volume
—
Base unit ringer volume
(Medium)
Call Options
Dial Mode
(
“
Tone
”
): page 11
Recall/Flash
Change the recall time
*1
(
“
600 msec.
”
*2
).
Call Restrict
page 24
Other Options
Base Unit PIN
Change base unit PIN (
“
0000
”
).
*3
– Enter the current 4-digit base unit PIN.
i
Enter the new 4-digit base unit PIN.
i
#
Repeater Mode
(
“
Off
”
): page 39
Country
Change the unit’s region setting (
“
EG
”
):
page 24
TG8100-8120FX(e).book Page 23 Wednesday, August 9, 2006 3:13 PM
