|
Base Unit Settings
25
Base unit settings
To customise the base unit using the handset:
1
"
(centre of joystick)
2
Select
|
by pushing the joystick in any direction.
i
#
3
Push the joystick up or down to select the desired item in the base unit settings
menu.
i
#
4
Push the joystick up or down to select the desired item in the sub-menu.
i
#
5
Push the joystick up or down to select the desired setting then press
#
.
L
This step may vary depending on the feature being programmed.
L
To exit the operation, press
{ih}
.
Note:
L
The current item or setting is highlighted on the display.
*1 KX-TG8220
*2 Change the recall time, if necessary, depending on the requirements of your
service provider/telephone company or PBX.
*3 When using the unit in Czech/Slovakia, select
“
100 msec.
”
as the recall time. If
you change the unit’s region setting/reset the base unit, the recall time will be reset
to the default setting. In this case, select
“
100 msec.
”
again.
*4 If you change the PIN, please make note of your new PIN. The unit will not reveal
the PIN to you.
*5 If you forget your PIN, consult your nearest Panasonic service centre.
Menu
Sub-menu
Details (default setting)
Ringer Volume
*1
—
For base unit
(Medium)
Call Options
Dial Mode
(
“
Tone
”
): page 13
Recall/Flash
Recall time
*2
(
“
600 msec.
”
*3
)
Call Restrict
page 26
Other Options
Base Unit PIN
Change base unit PIN (
“
0000
”
).
*4
– Enter the current 4-digit base
unit PIN.
*5
– Enter the new 4-digit base unit
PIN.
i
#
i
{ih}
Repeater Mode
(
“
Off
”
): page 42
Country
Change the unit’s region setting
(
“
Other
”
): page 26
TG8200_8220FX(e-e).book Page 25 Monday, August 6, 2007 5:25 PM
