– 3 –
L
When the unit is turned on, the
&
indicator and
w
indicator light amber for about 2 seconds.
2
Confirm that the
&
indicator and
w
indicator light green. (The unit is ready for use.)
L
If the indicators do not light green, re-position the unit in a place where the indicators light
green.
Note:
L
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm
during use.)
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause
it to become disconnected.
L
The unit can support a maximum of 3 handsets at a time.
Wall Mounting
Note:
L
Make sure that the wall and the fixing method are strong enough to support the weight of the
unit.
L
Drive the screws (not supplied) into the wall.
Specifications
N
Standard:
DECT (Digital Enhanced Cordless Telecommunications)
N
Frequency range:
1.88 GHz to 1.90 GHz
N
RF transmission power:
Approx. 10 mW (average power per channel)
N
Power source:
220–240 V AC, 50/60 Hz
N
Power consumption:
Standby: Approx. 1.0 W,
Maximum: Approx. 1.8 W
N
Operating conditions:
0
°
C – 40
°
C, 20 % – 80 % relative air humidity (dry)
Note:
L
Design and specifications are subject to change without notice.
L
The illustrations in these instructions may vary slightly from the actual product.
37 mm
Screws
TGA405EX(en).fm Page 3 Wednesday, August 22, 2012 10:39 AM
