Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp
17
Wall mounting
The cordless camera can be mounted by the standard mounting or upside down
mounting.
CAUTION:
L
Mount the cordless camera on the stable location where the unit can be adequately
supported when installing.
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L
Do not mount the cordless camera on a soft material. It may fall down, break or
cause injury.
L
Do not mount the cordless camera on the following places: plaster board, ALC
(autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm (1
inch) thick, and etc.
L
Do not pull the call button wire after you mount the cordless camera on the wall.
L
After mounting the cordless camera on the wall, speak loudly and clearly into the MIC
when talking with the handset user.
Connecting the wall-mounting adaptor
A
Slide the cordless camera into the wall-mounting adaptor in the direction of the arrow
until it clicks into the place.
B
Tuck the call button wire into the hole on the side of the wall-mounting adaptor by
plugging the small wire fixture into the hole.
C
Turning it slightly and sliding it in place.
D
Fasten the call button wire to the hook of the wall-mounting adaptor.
TGA573(e).book Page 17 Monday, April 24, 2006 2:05 PM