Preparation
8
For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the cordless camera
Connecting the AC adaptor and the call button
Connect the AC adaptor cord by pressing the plug firmly (
A
). Connect the call button cord
until it clicks into the unit (
B
).
L
Use only the included Panasonic AC adaptor PQLV235.
Note:
L
When the AC adaptor is connected, the indicator lights in red then starts flashing.
L
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
(120 V AC, 60 Hz)
B
A
Hooks
TGA573(e).book Page 8 Monday, April 24, 2006 2:05 PM