For assistance, please visit http://www.panasonic.com/help
5
Specifications
General
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Handset
Frequency:
5.76 GHz – 5.84 GHz
Dimensions:
Approx. height 156 mm
×
width 48 mm
×
depth 33 mm (6
1
/
8
inches
×
1
7
/
8
inches
×
1
5
/
16
inches)
Mass (Weight):
Approx. 160
g
(0.35 lb.)
Power output:
200 mW (max.)
Power supply:
Ni-MH battery (3.6 V, 650 mAh)
Charger
Dimensions:
Approx. height 68 mm
×
width 82 mm
×
depth 87 mm (2
11
/
16
inches
×
3
7
/
32
inches
×
3
7
/
16
inches)
Mass (Weight):
Approx. 80
g
(0.18 lb.)
Power consumption:
Standby: Approx. 0.4 W
Maximum: Approx. 3.3 W
Power supply:
AC adaptor (120 V AC, 60 Hz)
Note:
L
Design and specifications are subject
to change without notice.
L
The illustrations in these instructions
may vary slightly from the actual
product.
FCC and other
information
This equipment is hearing aid
compatible as defined by the FCC in 47
CFR Section 68.316.
When you hold the phone to your ear,
noise might be heard in your Hearing
Aid. Some Hearing Aids are not
adequately shielded from external RF
(radio frequency) energy. If noise
occurs, use an optional headset
accessory or the speakerphone option
(if applicable) when using this phone.
Consult with your audiologist or Hearing
Aid manufacturer about the availability
of Hearing Aids which provide adequate
shielding to RF energy commonly
emitted by digital devices.
WHEN PROGRAMMING
EMERGENCY NUMBERS AND(OR)
MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1) Remain on the line and briefly explain
to the dispatcher the reason for the
call.
2) Perform such activities in the off-
peak hours, such as early morning or
late evenings.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Privacy of communications may not be
ensured when using this phone.
TGA600(e).fm Page 5 Friday, January 26, 2007 3:46 PM
