5
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{ih}
for few seconds to turn the handset on.
1
Handset:
Lift the handset and press
{ih}
.
2
Base unit:
Proceed with the operation for your model.
3
Handset:
Place the handset on the base unit.
L
Continue the operation even when the handset display shows
“
Please wait for 1 minute.
”
.
4
With the handset still on the base unit, wait until a confirmation tone
sounds and
w
stops flashing.
Note:
L
If an error tone sounds, or if
w
is still flashing, register the handset
according to the base unit’s operating instructions.
L
The KX-TG6411 does not feature an answering system.
L
Answering system features are available only when this handset is
registered to the KX-TG6421/KX-TG6461.
N
KX-TG6411
Press and hold
{x}
for about 5 seconds. (No registration tone)
N
KX-TG6421/KX-TG6461
Press and hold
{x}
for about 5 seconds, until the registration tone
sounds.
L
If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
TGA641E(e).fm Page 5 Monday, December 15, 2008 6:24 PM
